Space-saving two-piece camera offers HD image quality and convenient integration with modern medical modality devices.
This two-piece HD colour video camera consists of a light, compact camera head and separate CCU (Camera Control Unit). The complete system is designed for convenient integration with medical modality equipment such as slit lamps and surgical microscopes.
High quality image reproduction is enabled by latest-generation Exmor™ CMOS sensor technology, offering improved low-light sensitivity compared with traditional equivalent-sized image sensors.
Brightness and colour can be easily adjusted from the CCU front panel, while workflow is further enriched with a range of useful imaging features and shooting modes. Customised picture profiles can be stored and recalled instantly, reducing time-consuming set-up between procedures.
The complete camera system can optionally be controlled from an external host device such as a computer. In addition, the camera head can be sited as far as 20m from the CCU (requires optional cables) for greater operational and integration flexibility.
Full HD video images can be viewed on a connected monitor (not included), or recorded for subsequent sharing and analysis with a suitable video recorder such as the Sony HVO-3300MT.
- Crisp, clear Full HD images
- Small, light camera head with C-Mount
- Support for wide range of HD and SD video formats
- Control camera head remotely from up to 20m
- Easily recall custom picture profiles
- Image flip
- Picture freeze
- Fluorescein Mode
- Versatile connection with wide range of interfaces
- Control by computer
- Two camera support for 3D shooting
- Colour bar for convenient set-up
- Direct AC power operation
- Compliance with medical standards
|Image Device||1/2.9 type ""Exmor"" CMOS image sensor, single chip type|
|Effective Pixels||1920 (H) x 1080(V)|
|Sensitivity||F5.6 (Typical) (At 1080/59.94i, 89.9% reflections, 2000 lx)|
|Picture S/N||55dB (Y) (Typical)|
|Horizontal Resolution||900TV lines or more|
|Gain||0dB to 27dB/td>|
|Shutter Speed||1/60 to 1/10000|
|Camera Cable Connector||20-pin, round|
|HD-SDI Video Format||1080/60P, 1080/60i, 1080/30P |
1080/50P, 1080/50i, 1080/25P
|HDMI Video Format||1080/60P, 1080/60i, 1080/30P, 480/60P |
1080/50P, 1080/50i, 1080/25P, 576/50P
|DVI Video Format||No|
|Picture Profile||Yes (Six settings)|
|Freeze Function||Yes (outputting a still image)|
|Color Bar||Yes |
It cannot be used for image quality adjustment.
|Camera Synchronization for 3D-shooting||Yes|
|AC Power Operation||Yes|
|Input Connectors||Remote contact switch 1, 2 (Stereo mini jack)|
|Output Connectors||VIDEO OUT (x1) (BNC) |
S VIDEO OUT (x1) (4-pin mini DIN connector)
HDMI OUT (x1) (HDMI connector)
HD-SDI OUT (x1)
|Input/Output Connectors||CAMERA (x1) (20-pin, round) |
RS-232C (x1) (D-sub 9-pin)
3D SYNC IN (x1), OUT(x1) (BNC)
|Other Connector||Equipotential ground connector(x1)|
|Power Requirements||100 to 240V AC, 50/60Hz|
|Input current||0.27A - 0.18A|
|Operating Temperature||0°C to 40° C |
32°F to 104°F
|Operating Humidity||20% to 80% (without condensation)|
|Operating Pressure||700 hPa to 1060 hPa|
|Storage and transport temperature||-20°C to +60°C |
-4°F to +140°F
|Storage and transport humidity||20% to 90% (without condensation)|
|Storage and transport pressure||700 hPa to 1060 hPa|
|Mass (Camera Head)||approx. 40 g |
approx. 1.4 oz
|Mass (Camera control unit)||approx. 2.3 kg |
approx. 5 lb. 1.1 oz
|Dimensions (Camera Head) |
(WHD, excluding longest protrusions)
|approx. 27 x 28 x 49 mm |
approx. 1 1/8 x 1 1/8 x 1 15/16 in.
|Dimensions (Camera control unit) (WHD, excluding longest protrusions)||approx. 200 x 62 x 240 mm |
approx. 7 7/8 x 2 1/2 x 9 1/2 in.
|Supplied Items||AC power cord (x1) |
Tripod adaptor (x1)
Tripod adaptor locking screws (x2)
Lens mount cap (x1)
Before Using This Unit (x1)
CD-ROM (Instruction for Use in PDF format (x1)
Warranty Booklet (x1)
Service Contact List (x1)
|Separately-Sold Accessories||Camera Cable |
CCMC-SA06 (standard 6m (19.6ft))
CCMC-SA10 (standard 10m (32.8ft))
CCMC-SA15 (standard 15m (49.2ft))
CCMC-EA05 (extension 5m (16.4ft))
Foot Switch (FS-24)
The FS-24 has an Ingress Protection rating of IPx3.Therefore, do not operate it environments exposed to splashing liquids(e.g.,surgical operating rooms). For safety, use a device with a rating of IPx6 or higher when operating in such environmets.