High-performance, easy to use multifunctional 32-inch 4K medical grade monitor
The LMD-X3200MD 32-inch medical grade monitor displays very high quality 4K Ultra HD 2D colour images. Slim, light and easy to use with generous signal connection options, the widescreen (16:9) monitor features a flat, hygiene-friendly design that’s optimised for use in medical environments.
Please note that this equipment is not intended for diagnostic use.
32-inch monitor with superb 4K Ultra HD picture quality
The LMD-X3200MD displays extremely high quality 4K Ultra HD images with a resolution of 3840 x 2160 pixels (16:9 screen aspect ratio). Thin, light and suitable for boom arm mounting, the monitor features a large 32-inch panel that provides an image wider than the 31 inch LMD-X310MD within the same chassis width.
Accurate colour reproduction and more realistic visualisation
The monitor’s advanced LCD panel and signal processing technology support highly consistent, accurate reproduction of a wide colour gamut. This complies with ITU-R Recommendation BT.2020 that represents a significantly wider gamut than the BT.709 colour space, allowing superior colour reproduction and more realistic visualisation.
The design and powerful imaging features of the LMD-X3200MD ensure optimal performance and usability in demanding surgical environments.
V Full mode
Along with the standard variety of display modes that come with our monitors – side-by-side, picture-in-picture (PIP) and picture-out-picture (POP) – the LMD-X3200MD comes with the newly added V Full mode, that allows users to change the aspect ratio of POP images to 16:9. As a result, the usually smaller POP images can be enlarged and displayed full screen. The user can large either both of the POP images or just one of them depending on the requirement.
Wider brightness levels and greater contrast thanks to HDR
HDR technology allows the LMD-X3200MD to accurately reproduce images with a wider range of brightness levels, greater contrast and rich colours. When receiving HLG (Hybrid Log-Gamma) signals from a compatible imaging system, selecting HLG in monitor gamma setting mode allows the monitor to display HDR images.
Designed for ease of use and safety
The LMD-X3200MD is designed for ease of installation and reliable, user-friendly operation.
More flexible, user-friendly cabling
All cable connectors on the monitor’s redesigned rear face downwards for easier, more tidy cable hook-ups. Installation is simplified with three cable access points. A small cable cover is useful when the LMD-X3200MD is attached to a monitor arm. A medium-sized cable cover specifically for the 12G-SDI input/output connector is useful for providing a through-out connection to a second monitor without removing the large cover that protects all the other connectors.
Various IN/OUT connectors including 12G-SDI
The LMD-X3200MD offers a wide range of connectors such as 12G-SDI, 3G-SDI, Display Port, HDMI and DVI to meet a wide variety of user needs.
This product is distributed to the US and EU as a medical device and satisfies product safety standards (e.g. IEC 60601-1).
For more details, please contact our sales team.
|Panel||TFT Active Matrix LCD|
|Picture Size (Diagonal)||800.757 mm (31 5/8 inches)|
|Effective Picture Size (H x V)||697.92 x 392.58 mm (27 1/2 x 15 1/2 inches)|
|Pixel pitch||0.182 x 0.182 mm (0.007 x 0.007 inches)|
|Resolution (H x V)||3,840 x 2,160 pixels|
|Panel Technology||LCD with IPS|
|Luminance (Panel Specification)||500 cd/m2 (typical)|
|Colors||Approx. 1.07 billion colors|
|Viewing Angle (Panel Specification)||89°/89°/89°/89° (typical) (up/down/left/right, contrast > 10:1)|
|Gamma||1.8, 2.0, 2.2, 2.4, 2.6, DICOM, HLG|
|HDMI Input||HDMI connector (x1) |
|DVI-D Input||DVI-D connector (x1) |
TMDS single link, HDCP1.4 correspondence
|SDI Input||3G-SDI input connector BNC type (x1) |
12G-SDI input connector BNC type (x1)
|Display-Port||Display Port connector (x1) |
SST, HDCP1.3 correspondence
|Serial Remote (LAN)||D-sub 9-pin (RS-232C) (x1) |
RJ-45 modular connector (ETHERNET) (x1)
|Remote||Stereo mini jack (x1)|
|AC input||AC input connector (x1) |
100 V to 240 V, 50/60 Hz
|DC input||DC input connector (x1) |
DC 26 V
|SDI Output||3G-SDI output connector BNC type (x1) |
12G-SDI output connector BNC type (x1)
|CLONE Output||CLONE output connector BNC type (x1)|
|DC 5 V Output||Round-type 3-pin female (x1), up to 2 A|
|DC 12 V Output||Round-type 4-pin female (x1), up to 2.5 A|
|Power Requirements||AC IN: 100 V - 240 V, 50/60 Hz, 1.7 A - 0.8 A |
DC IN: 26 V, 5.8 A (Supplied from AC adaptor)
|Power Consumption||Approx. 163 W (max.)|
|Operating Temperature||0 °C to 35 °C (32 °F to 95 °F)|
|Operating Humidity||30% to 85% (no condensation allowed)|
|Storage/Transport Temperature||–20 °C to +60 °C (–4 °F to +140 °F)|
|Storage/Transport Humidity||20% to 90% (no condensation allowed)|
|Operating/Storage/Transport Pressure||700 hPa to 1,060 hPa|
|Dimensions (W x H x D)||753.9 x 476.3 x 79.2 mm (29 3/4 x 18 7/8 x 3 1/8 inches) |
753.9 x 533.3 x 319 mm (26 3/4 x 21 x 12 5/8 inches) (with optional SU-600MD stand)
|Mass||Approx. 11.8 kg (26 lb 1 oz) (without optional SU-600MD stand)|
|Mounting||100 x 100 mm VESA|
|Supplied Accessories||AC power cord (1) |
Plug holder for the supplied AC power cord (2)
Before Using This Unit (1)
CD-ROM (including the Instructions for Use) (1)
Service Contact List (1)
Screws for the VESA mount, M4 x 12 mm (4)
|*||This product is distributed to EU and US as a medical device and satisfies product safety standards (e.g. IEC 60601-1)|